FREQUENTLY
ASKED
QUESTIONS

When you order one nanofilm, you get a one-digit sticker. You can add the necessary symbols to the cart on website.

It is quite difficult to damage the Ecoslick® sticker because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

The infrared beams of speed cameras work both day and night.

Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective. All numbers and symbols comply with the national standards of each country. On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Apply the sticker carefully — it bonds instantly and can't be repositioned. You can see visual instructions on our set up page.

When ordering one nano-film, you receive a piece of material from which you can cut out the letters you need on your own.

It is quite difficult to damage the Ecoslick® because it is attached very firmly, forming an almost inseparable bond with the license plate. Even if there are scratches, it will be very difficult for the speed camera to determine which symbol is covered.

Ecoslick nanofilm is not afraid of washing, any type of car wash. The film is almost impossible to tear off with water pressure. Therefore, be extremely careful and precise when gluing.

Depending on the terrain, speed cameras may be located in two directions and will record your car from both sides. We recommend gluing the film on both sides.

Cut the piece of the material and stick it on the corresponding symbol on the license plate. Then cut around the outline of the symbol. Cut slowly and do not press the blade too hard to avoid damaging the license plate. Gently remove the exess of material and it's done!

The more symbols are hidden under the nanofilm, the less opportunities there are to decipher the number from the camera recording. It is recommended to cover all front and back license plates symbols.

Ecoslick® film is designed for many years of use, since it is created from durable, wear-resistant materials designed to withstand difficult weather conditions, temperature changes and varying degrees of mechanical impact. The warranty period is 5 years.

Infrared light is highly focused rays that are invisible to the human eye and are different from the bright flash of a camera. It is in the infrared spectrum that automatic speed cameras operate. It is against this spectrum that Ecoslick® film acts.

The camera only sees the illuminated area where the symbols are hidden under the Ecoslick® stickers, which blends into the white background. Accordingly, the digital system does not recognize the number and does not record it in the database of traffic violations. There is no one to give a fine!

The infrared beams of speed cameras work both day and night.

Our Ecoslick® nanofilm is manufactured in Germany and is therefore reliable and effective.
All numbers and symbols comply with the national standards of each country.
On the market you can find offers with a suspiciously low price - accordingly, such a film will not protect you from the eyes of a traffic cop or simply will not fit the size of your license plate.

Easily attach the frame using included screws or adhesive — you can read the full instructions set up page.

We offer multiple versions of the Alite Blackout, designed to accommodate both USA and European license plate sizes.
USA Versions:
- Alite Blackout License Plate Hider - for 1 license plate (US version)
- Alite Blackout License Plate Hider - for 2 license plates (US version)
European Versions:
- Alite Blackout License Plate Hider - for 1 license plate (EU version)
- Alite Blackout License Plate Hider - for 2 license plates (EU version)
Each version ensures a perfect fit for its designated region, providing a seamless and discreet look.

Each kit contains:
- One or two Alite Blackout frames (depending on the selected version).
- Mounting hardware for secure installation.
- Electrical cables required for installation.
- Installation manual for easy setup.

When activated, the mechanism obscures the license plate, reducing its visibility to cameras. It is designed for controlled use and provides a discreet, seamless effect.

No, the Alite Blackout is designed to be discreet. It looks like a standard license plate holder when not activated.

No, the mechanism is built to withstand wind pressure and external force. It remains secure even during high-speed driving or attempts to manipulate it.

Each kit includes two remote controls for convenience. If both are lost, you may need to contact customer support for replacement.

Yes, the Alite Blackout is made with durable materials to withstand various weather conditions, including rain, snow, and heat.

Mount the frame, connect the power, and use the remote to activate blackout mode — you can read the full instructions set up page.

We offer two versions:
- A hard traction mechanism for the front plate.
- A 1-meter cable version for the rear plate.
Additionally, you can purchase a bundle that includes frames for both plates.

The kit includes:
- One or two frames (depending on the selected bundle).
- A remote control unit.
- Two remote controls.
*Note: Electric cables for installing the frames are not included in the kit.*

When you press the button on the remote, the mechanism folds the license plate downward by 90 degrees, making it face the ground. This prevents cameras from reading the plate.

No. The Alite Flipper+ is designed to be discreet, with all mechanisms and construction hidden within the car body. It looks like a standard license plate holder.

No. The mechanism is designed to resist wind pressure and cannot be folded back by external force. It remains secure during fast driving or under physical attempts to manipulate it.

Each kit includes two remote controls for convenience. If both are lost, you may need to contact customer support for replacement.

Yes, the Alite Flipper+ is built with durable materials designed to withstand various weather conditions, including rain, snow, and heat.

Attach the frame using screws, then use the remote to fold the plate when needed — you can read the full instructions set up page.

Alite Nanotape is a frameless license plate mounting system that uses high-strength Velcro and 3M adhesive to securely attach your plate without screws or drilling.

There are two versions: one sized for EU plates and one for US plates, ensuring a perfect fit.

The 3M adhesive and Velcro system can hold up to 50 kg, providing a rock-solid grip in all conditions.

The Velcro-based system allows for quick removal and reattachment whenever needed, without losing its strength.

Alite Nanotape is weatherproof, heat-resistant, and durable, ensuring a firm hold in rain, snow, and high temperatures

Each kit includes two remote controls for convenience. If both are lost, you may need to contact customer support for replacement.

The 3M adhesive is designed for long-term durability, providing a strong bond for years without weakening.

Clean the surface, stick the nanotape, and press the plate firmly — you can read the full instructions set up page.

The kit includes 4 clip-style holders for mounting 2 license plates (front and rear), plus everything needed for installation.

Yes, it’s specifically designed for US plates and fits standard American plate dimensions perfectly.

No drilling required. It installs using the existing factory holes — no extra tools or modifications needed.

Absolutely. Each clip is rated to hold up to 50 kg, ensuring strong grip and stability under any driving conditions.

The clips are made from durable, weather-resistant materials that won’t rust or damage your plate.

This version is tailored for US car plates only. For motorcycles or international formats, check our other variants.

It appears almost floating — with no bulky frame, giving your car a clean, frameless look.

Yes! The Easyclick system is fully reusable, so you can easily remove and reattach plates when needed.

Just wipe occasionally with a cloth. No special maintenance or care is required.

Barely. The clips are minimal and discreet, blending in with most plate colors and remaining almost invisible.

The set includes 4 powerful magnetic holders — enough to mount two license plates (front and rear), along with all mounting components.

One magnet set mounts to the vehicle, the other to the license plate. They lock together magnetically, holding your plate firmly in place with no visible frame.

Yes. Each magnet holds up to 50 kg, ensuring your plate stays secure even at high speeds and in rough conditions.

Absolutely! That’s the whole point — the Maglock system is fully removable and reusable, ideal for switching plates or cleaning.

No. The kit uses existing license plate holes — no drilling or permanent modifications required.

No. The magnets are coated and designed to avoid scratching or damaging surfaces when used properly.

Yes! While it’s optimized for US license plates, the Alite Maglock™ system can be used with any flat license plate format — including EU, UK, and others — as long as there’s a solid mounting surface.

Barely. The Maglock is a frameless, sleek system, so the plate appears to float without visible brackets

Yes. The magnets are weather-resistant and maintain grip in all conditions — rain, heat, or snow.

It’s perfect for car enthusiasts, tuners, or anyone wanting a stealthy, clean plate look with the freedom to remove or switch plates anytime.

It’s a remote-controlled plate hider that makes your license plate slide downward and disappear from view with the press of a button.

Once installed, the system allows your plate to drop down inside the frame when activated by a remote — effectively hiding it from all cameras.

Yes, when the plate is hidden, it becomes invisible to ALPR, speed cameras, and red-light systems.

You control it remotely with a wireless key fob. Just press the button, and the plate instantly slides down — no wires, no switches, no hassle.

The Slideplate is plug-and-play and can be installed in under 5 minutes using basic tools.

You get 1 sliding frame unit, remote controls, wiring, and mounting screws — everything needed for a full setup on one plate.

This kit is for one plate only. If you want to hide both front and rear plates, you’ll need to purchase two kits.

Yes, the Slideplate is sized for standard US plates and fits most vehicles with flat mounting areas.

Yes. The unit is water-resistant and temperature-resistant, built to handle rain, snow, and heat.

It connects to a 12V power source (like your car battery or fuse box) and comes with simple wiring instructions.